Caswell Inc   7696 Route 31
Lyons NY 14489 USA
Orders: Toll Free 1-855-CASWELL
Product Selection Help

Order By Phone: 9am-4pm ET


Buy Caswell Gas Tank Sealer Here

Welcome To Caswell


50% OFF

All VHT, Dupli-Color, Krylon, Permatex, Plasti-Dip and Powder Coating Colors

Order Now While Supplies Last 

* - While Supplies Last. Limited Stocks available. We are not able to apply to items not in stock. No backorders.

Grip-Strip™ Fine Hunter Green

Be the first to review this product

Use Your Points:
You will earn 49 Caswell Gold Rewards Points for buying this product

Quick Overview


Grip-Strip™ Non-Skid System is designed to treat real problem areas such as steps, ramps, cat-walks, ladders, tank-tops etc. where chemicals and liquids cause a hazard.

Grip-Strip is a Phenol Novolac Epoxy applied as a viscous liquid to selective masked up areas. A crystal-like sharp aggregate is pressed into the surface, providing the tough grip properties.

Grip-Strip can be applied to existing epoxy coated floors where extra grip is needed in problem areas. It is NOT designed as a total coverage system.

Grip-Strip won't peel up or curl when gasoline or oil is present, unlike sticky backed tapes.

Grip-Strip™ Fine  Hunter Green

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Caswell Grip-Strip™ Non-Skid Coating is a unique two part epoxy coating that is easy to apply, fast curing, chemical resistant, highly durable and cost effective way to apply a non slip coating to:

  • Concrete
  • Ceramic Tile
  • Checker/Diamond Plate
  • Aluminum
  • Steel
  • Wood
  • Fiberglass

It is ideal for many applications, including:

  • Steps
  • High traffic areas
  • Boats
  • Ramps
  • Platforms
  • Ladder rungs
  • Swimming Pools
  • Decks
  • Fiberglass boat decks

Grip-Strip™ Non-Skid coating will withstand solvents, gasoline, ethanol, oil, muriatic acid, sulfuric acid and chlorine.

It is available in a fine grade for indoor applications or a coarse grade for outdoor applications. Using a long lasting aluminum oxide abrasive ensures that the non-skid coating does not wear down, unlike sand or rubber. The aluminum oxide grit actually breaks when abraded, creating another sharp non-skid edge.

The Grip-Strip™ Non-Skid System contains enough materials to create approx 180 feet of 1 inch wide strips, or 90 feet of 2 inch wide strips, or 60 feet of 3 inch wide steps (approx 15 sq ft)

Read The Application Instructions (280kb PDF)

To create a durable, eye catching non-skid surface:

  1. Prep the surface with the included flap wheel. If the surface is oily, remove the oil first with lacquer thinner or acetone.
  2. Sweep or vacuum up any dust.
  3. Apply the masking tape to create your design.
  4. Mix up the resin with the included mixing cup, using a 2:1 ratio
  5. Scatter the abrasive into the resin and sweep it into the other strips using the included brush.
  6. Tamp the abrasive into the resin with a block of wood.
  7. Remove the tape

The system will accept light foot traffic after 4 hrs (at 75 deg F) and full chemical resistant properties in 5 days.

The Grip-Strip™ Non-Skid Coating Kit Contains:

  • 180' x 1" Industrial Masking Tape
  • 1" Application Brush
  • 1.5 pint Grip-Strip™ Phenol Novolac Epoxy in your choice of Safety Orange, Safety Yellow, Clear, Hunter Green, Black, White
  • 1 x 80 grit 3" Flap Wheel
  • 2 x Graduated Measuring Cup
  • 3lbs Non Skid Granules in fine or coarse

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Earn 5 Caswell Gold Rewards Points for each approved tag you make.