Fully Adjustable Output From 0-100KV

Force-Feed Technology For High Volume, Uniform and Consistent Powder Flow

Download Owner's Manual - (616kb PDF)

Charge: Controllable up to 100 kV
Powder flow: ForceFeed technology (not gravity-feed) for smooth uniform powder flow

Who would require the RED LINE EZ100 ...

• The entry-level coater - an ideal start-up powder gun
• The casual coater - a hobby powder gun with unbeatable results
• The professional coater - a low cost standby powder gun
• The powder coatings manufacturer - ideal cup/gun for the lab and for on-site work
  

• No control panel required - high performance electronics & pneumatics miniaturized into the gun itself - with virtually no change in the overall weight of the gun
• No hopper required - large sized cup feeder - 0.5 kg (1 lb) capacity
• No messy tubes or cables - all in-built - only your power cable & compressor line
• 1/8" x 28 NPT Female Air Connection (Male Connector Not Included)

The EZ100 is a complete 100 kV powder coating gun

1. Plug into your wall power-socket - 100V - 260V AC 50/60Hz
2. Connect a small air compressor line - 1 - 3 kg/cm2 (14 - 40 psi) pressure
3. Ground the part properly
4. Fill powder in the cup
5. Spray

30 Day Manufacturer's Warranty Included. Spare parts and repair service available upon request.