OEM specified. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4" to 1" (6mm to 25mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly.

Suggested Applications:
Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs

OEM specified. A permanent, high strength product that is applied to fasteners 3/8" to 1" (10mm to 25mm) in size before assembly. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Localized heating and hand tools are required to separate parts.

Suggested Applications:
Assembly with air tools, cylinder block bolts, ring gear bolts, transmission shaft bolts.

OEM specified. High strength threadlocker for heavy-duty applications. Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. Requires extra effort or special tools for removal.

Suggested Applications:
Cylinder block and rocker arm studs, ring gear bolts, frame bolts, shock absorber bolts.

OEM specified. Hi-temp/hi-strength threadlocker for heavy-duty applications. Prevents bolts and press fits 3/8" to 1" (10mm to 25mm) from loosening due to shock, severe vibration and heat stress. Exclusive formulation for newer engines and high performance applications that require extreme temperature resistance. Suited for temperatures up to 450°F (232°C). Removable with heat and hand tools.

Suggested Applications:
Camshaft sprocket bolts, crankshaft bolts, idler bearings, press fit filler tubes, transmission input and output shaft threads, ring gear or shock bolts.

OEM specified. A low viscosity threadlocking liquid that wicks along the threads of preassembled fasteners to secure them in place. Since it is applied after assembly, preventive maintenance procedures are simplified. Ideal for fasteners ranging from #2 to 1/2" (2.2 to 12mm) in size. Localized heating and hand tools are needed for disassembly.

Suggested Applications:
Bolts on alternators, air conditioning belts and distributor clamps, carburetor adjustment screws, hairline cracks.

OEM specified. Formulated specifically for metal, tapered pipe thread fittings, High Performance Thread Sealant replaces Teflon® tape and pipe dopes. Cures rapidly to withstand 10,000 PSI. Perfect as a replacement for Vibra-Seal® pre-coated parts. Prevents galling and protects mated threaded areas from rust and corrosion. It is certified to ANSI/NSF Standard 61 for use in potable water systems.

Suggested Applications:
Stainless steel fittings, head bolts into through holes, oil PSI sending units/sensors, oil and coolant lines, intake manifold switches, rear axle fill plug, fuel fittings.

Universal sealant. Lubricates and seals threaded joints on water, oil and fuel lines. Temperature range -65°F to 400°F; resists common shop fluids.

Suggested Applications:
Thread fittings, plumbing applications.

Makes reliable thread repairs without drills, taps, tools or inserts. Restores worn, stripped or damaged threads and eliminates future corrosion, galling, seizing and rust. Effective up to 128 ft. lbs. of torque and between -65°F to 300°F. Repairs most metal-to-metal fasteners up to SAE grade 5 English and 8.8 metric (coarse and fine).

Suggested Applications:
Intake manifold bracket fastener threads, timing chain cover bolt threads, valve cover bolt threads, water pump bolt threads.

OEM specified. A low viscosity, rapid-curing anaerobic adhesive that augments the strength of press fit assemblies or slip fit assemblies up to .005" in diameter. Adds up to 3,000 PSI holding power.

Suggested Applications:
Bushings, bearings, oil seals, ring gear bolts, differential lock pins.

OEM specified. High temperature anaerobic adhesive that secures slip and press fit assemblies. Adds up to 3,000 PSI holding power. Restores fit to worn or out-of-tolerance assemblies. Prevents surface corrosion.

Suggested Applications:
Cylinder sleeves, valve guides, valve seats, bearings and bushings, woodruff keys, liner assemblies.

OEM specified. High strength, medium viscosity anaerobic adhesive for slip fit assemblies. Provides 4,000 PSI shear strength on steel. Fixtures in 10 minutes at room temperature.

Suggested Applications:
Replaces set screws, replaces clamp rings, replaces snap rings, wheel bearings, idler shaft, press fit bearings.

OEM specified. A creamy, non-running adhesive used between parts to repair large gaps and severely worn parts. Fills gaps to .020" in diameter. Very rapid cure.

Suggested Applications:
Refitting worn shafts and housings, repair worn keyways, repair loose set screws, refit worn couplings, form-in-place shims.