Caswell Inc   7696 Route 31
Lyons NY 14489 USA
Orders: Toll Free 1-855-CASWELL
Product Selection Help

Order By Phone: 9am-4pm ET

1-855-CASWELL

Buy Caswell Gas Tank Sealer Here

Welcome To Caswell

Plasti Dip Motorcycle Spraying Kit

Be the first to review this product

You could receive 100 Caswell Gold Rewards Points for writing a review and/or rating this product.
Use Your Points:
You will earn 189 Caswell Gold Rewards Points for buying this product

Quick Overview

SKU: PDIP-MCKIT

Our Plasti Dip Motorcycle spraying kit contains all the essentials to coat your motorcycle (approx 15 sq ft) with Plasti Dip, a high tech, rubberized coating that looks great, is highly durable, inexpensive to apply and peels right off when you want to change colors, or go back to your original finish.

Plasti Dip Motorcycle Spraying Kit

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

* Required Fields

$189.00

Our Plasti Dip Motorcycle spraying kit contains all the essentials to coat your motorcycle (approx 15 sq ft) with Plasti Dip, a high tech, rubberized coating that looks great, is highly durable, inexpensive to apply and peels right off when you want to change colors, or go back to your original finish.

Why spend hundreds of dollars powder coating when you can Plasti Dip?

Kit includes:

  • 1 Gallon of pre-thinned, sprayable Plasti Dip
  • 1 Earlex 3500 Self Contained Sprayer
  • Painters Masking Tape
  • 2 x Shammy Cloths (for pre-coat cleaning)
  • 2 x Microfiber Cloths (for polishing the finished product)

The Plasti Dip colors give a Matte finish. If you want a gloss finish, simply select "Gloss" from the Sheen option above, and we'll add a gallon can of pre-thinned Glossifier. Apply this coating after your Plasti Dip has dried.

To coat:

  1. Wash the parts to be painted with soap and water, then clean the part with acetone, lacquer thinner etc to remove all grease and oils.
  2. Dry parts with the shammy cloth.
  3. Mask off the areas you don't want painted with newspaper and the supplied masking tape.
  4. Apply 3-4 coats of Plasti Dip, allowing approx 30 minutes between coats.
  5. Allow to dry (24-48 hours)
  6. Apply Glossifier if a gloss finish is desired.
  7. Polish with the microfiber cloths.
  8. Do not wax the finish, or use a mechanical buffer. Waxing will leave a white residue. Mechanical buffing or pressure washing will remove the coating.

Not to be used in California. For manufacturer use only. Not for use as an architectural coating

Contains Hazardous Goods. Shipping restrictions apply. Ground shipping only to the Continental USA. Please call +1 315 946 1213 or contact us for rates to other locations.

Flammable

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Earn 5 Caswell Gold Rewards Points for each approved tag you make.