|
Caswell's Tin Plating kit will plate directly over, copper, steel,
brass, bronze. Other 'difficult' metals such as pot metal, will require
a coat of Flash Copper™ first.
Average thickness is typically 0.0002-3” (0.10” in 10
mins)
Setup involves mixing 2 quarts of battery acid into
3.5 quarts of distilled water, then adding one quart
of Tin Concentrate and one pint of Tin Activator. Triple
these quantities for the 5.25 gal kit.
The Caswell Tin Plating System is a stable bath, which deposits
a leveled, brilliant plate with excellent soldering capabilities.
It has a wide operating range in regard to concentration and operates
well with low tin concentration.
1.75 Gallon Kit
- 2 x Tin anodes 4" x 8"
- 2 x 2 gal tank & lid
- 1 Quart x Tin Concentrate
- 1 Pint x Tin Activator
- 1 x 300W 110°F Heater (for plating)
- 1 x 300W 210°F Heater (for degreasing)
- 4 Gals SP Degreaser
- The Caswell Plating Manual
- Free Technical Support
|
5.25 Gallon Kit
- 2 x Tin anodes 4" x 8"
- 2 x 6 gal tank, lid & locking ring
- 3 Quarts x Tin Concentrate
- 3 Pints x Tin Activator
- 1 x 300W 110°F Heater (for plating)
- 1 x 300W 210°F Heater (for degreasing)
- 8 Gals SP Degreaser
- The Caswell Plating Manual
- Free Technical Support
|
| System Uses Additives From: |
|
|
