| Make
non-conductive items such as plastics, resins, leather,
ceramics, cardboard, flowers, leaves, roses etc. conductive
so they can be plated.
Copper Conductive Paint is an inexpensive alternative
to our highly conductive Silvaspray™
silver conductive paint.
Porous items such as leather, cardboard, plants etc.
should first be dipped in our Sealer Concentrate. Most
plastics can be sprayed directly. No primer required.
After
spraying parts with the conductive paint, allow to
dry and dip in Tinning
Solution, then plate with our
Acid Copper Plating Kit.
Ideal for electroforming.
Requires a small airbrush or Preval Sprayer.
Available in 4oz cans.
Preval Sprayer
 |
Use this spray system to spray Copper Condutive
Paint, Silvaspray, or any lacquer based paints.
System comes complete with glass jar, sprayer
and lid. Refill sprayers are available. |
Caswell Sealer Concentrate
SEALER
is a fast drying coating that penetrates porous materials
such as cloth, leather, plaster of paris, concrete etc.
rendering it non-porous.
The concentrate can be used as is, or thinned with an equal amount of water. The part is then totally immersed in the solution
for 15-30 minutes, then allowed to drip dry. A second
application several hours later renders the surface
completely smooth and non-porous.
To make the part conductive the part is then sprayed
with SilvaSpray. Finally,
the part can be plated with bright acid copper, nickel
or Copy Chrome.
Ideal for plating baby shoes, bone, plants, cloth and
other porous items.
Caswell Tinning Solution
Adds a conductive coat for high quality
electroforming. For better results when using any conductive
coating, dip parts in solution for 60 seconds, then plate
with Acid Copper.
Use solution at room temperature. No rectifier
or power source required. Corrosive Liquid. |
