| Pyro-Putty 2400
This
high temperature ceramic and stainless steel metal-filled paste is ideal
for repairing defects in manifolds, headers, exhaust
pipes, mufflers, and more.
Withstands temps up to 2000F
Pyro-Putty
2400 bonds tenaciously to cast iron and
steel and stainless steel, and is easy to apply, cure, machine and clean.
Can be applied up to 3/8" thick. Air sets in 2-4 hours. Heat cure at 200F for 2-4 hours.
Pyro-Putty 1000
Pyro-Putty 1000 is a 2 part ceramic and aluminum filled paste, that withstands temps up to 1400F. Repairs cast aluminum parts. Can be applied up to 1/2" thick. Air sets in 2-4 hours. Heat cure at 160F for 1-2 hours.
Techno-Weld
TECHNO-WELD is a revolutionary material
in the field of Aluminum Joining, and overcomes some
of the major problems associated with traditional methods.
SIMPLE TO USE - Joining with TECHNO-WELD
is a similar process to gas soldering/silver soldering,
therefore traditional Aluminum welding skills are not
necessary. Like soldering, it is a two stage process,
where the first stage is to heat the work piece to 380C
and 'tin' the surfaces to be joined with the TECHNO-WELD
rod - the TECHNO-WELD alloy diffuses into the surface,
changing the composition and reducing the melting point
of the parent alloy.
The second stage is to reheat the mated
surfaces to 380°C, allowing the surface layers to
fuse together. Any general heat source appropriate to
the job can be used, such as an Air-Acetylene or Air-Propane
Blowtorch. No need to raise the temperature of the job
dangerously near the melting point of the Alloy itself,
avoiding the possibility of sudden collapse of the job.
NO FLUX/FLUX FUMES - The process requires no Flux at
all, and is therefore free from toxic flux fumes There
is no need for special cleaning processes after the
work has been done. Any joints that have been prepared
with TECHNO-WELD can be ground back and painted or plated
without the possibility of the coating 'spoiling' due
to flux migration.
A STRONG FUSION WELD - TECHNO-WELD forms a true Fusion
Weld. Although the welder is not heating the work piece
up to it's melting point, the area of work piece under
the correctly applied TECHNO-WELD will melt and form
an alloy with the TECHNO-WELD material without high
local temperatures The resultant material is very hard
(like a soft version of mild steel), has good tensile
and compressive strengths which serves to reinforce
the join or filled area.
VERSATILE - TECHNO-WELD is effective on
virtually all grades of Aluminum Alloys, including special
derivatives such as MMC's, Birmabrite (Land Rover bodies),
as well as Zinc and low Magnesium content Alloys. The
TECHNO-WELD material has a high surface tension in it's
molten state, and can therefore be used to bridge gaps
and holes up to 10mm in die, and can be used to 'build
up" areas of missing metal.
|
