Complete Super Casting Kit & Mini Super Casting Kit

Super Kit Includes:

• AB28 Kit 28oz Super Plastic Alumilite Regular
• 1 lb. QuickSet RTV Silicone Rubber
• 1 lb. Alumilite Synthetic Modeling Clay
• 2 oz. Rubber to Rubber Mold Release
• 1 oz. Measuring Cups
• Stir Sticks
• How-To Booklet

The Super Casting Kit contains everything you need to make a mold and cast your part in 1 day! All measuring tools are included for the Alumilite and the QuickSet Rubber. All products are non-toxic and can easily be used in your home. The Mini Super Casting Kit contains all of the same materials as the Super Kit includes but in smaller quantities. (note: the Mini Super Casting Kit does not contain Mold Release Powder)

Casting Resin

Alumilite's polyurethane casting resins allow you to cast exact replicas of an original very quickly. The castings can be dyed, painted, stained, tapped and/or machined.

3 Easy Steps To Using

1. Measure equal parts of A & B
2. Combine and mix
3. Pour - Liquid to Solid in 3 minutes

28 oz Kit

RTV Silicone Mold-making Rubber

• 1 lb Kit Base & Catalyst
• Easy Instructions Included
• Mixing Ratio 10:1/Base:Catalyst
• Working Time: 30 mins
• Cure Time: 4 hours
• Optimum cure is reached in 24 hours. When Alumilite "Quick-Set" RTV Silicone Rubber is fully cured it remains flexible from -70°F to 400°F, with intermittent exposure to 500°F.
• Available in Quick Set and High Strength Formulations

Synthetic Modelling Clay

• The synthetic clay is used for creating one time original patterns, sealing mold boxes and for claying up two part molds. Alumilite's clay will never dry out and can be reused over and over again.
• 1 lb

5 Minute Mold Putty

• Alumilite's 5 Minute Mold Putty allows you to make quick impressions without a mold box, in just 5 minutes.
• It is safe to use and complies with FDA standards for food contact.
• 1 lb

Rubber To Rubber Mold Release

• Use Alumilite's Rubber To Rubber Mold Release in between pours of silicone rubber to prevent the rubber from adhering to itself.
• Simply shake the bottle before using and paint the mold release on the cured rubber before pouring the second half of the mold.
• 2 oz